Lightweight Portable Vinyl Fence ZP19026

Important Safety Notes:

• Check the inside of the larger pieces in your box for other materials packed inside.
• When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching.
• We recommend an area approximately 5' x 8' for unobstructed assembling.
• You should not need to use excessive force when assembling components.

Returns:
If you wish to return your product, please contact us first — we can often help resolve the issue right away.
If a return is still necessary, it must be initiated with the retailer where the product was purchased.

Need Help or Replacement Parts?

If you need replacement parts, assembly assistance, or have questions about the product, our customer service team is ready to help:

• Website: https://parts.nychbrands.com
• Email: support@zippity-outdoor.com
• Phone: 704-892-5222 or 877-234-6196

Customer service agents are available 9am–5pm EST, Monday–Friday.

For Quick Assistance:

• Have reference item number ZP19026
• Provide the specific part name
• Include the batch lot number found on the end of the box

Drill

A — Post Cap (2)

B — Top Rail (1)

1½" x 1½" x 91⅞"

C — Post (2)

⅞" x 1½" x 41½"

D — Picket (20)

¼" x 1½" x 38⅜"

E — Bottom Rail (1)

1½" x 1½" x 91⅞"

F — Metal U-Joiner (2)

G — Metal Foot (2)

H — ¾" Self-Drilling Stainless Steel Screw (8)

• Lay the Top Rail (B) flat on the shipping box or another smooth surface to prevent scratching during assembly.

• Slide both Posts (C) into the pre-drilled holes of the Top Rail (B) as illustrated.

• Drive (2) ¾" Self-Drilling Stainless Steel Screws (H) through the top rail into each post to secure the posts in place.

• Slide all (20) Pickets (D) into the routed holes of the Top Rail (B) as illustrated.

• Slide the Bottom Rail (E) onto the bottoms of all (20) Pickets (D) as illustrated.

• Align the bottom rail so the pickets seat flush and evenly into the routed holes.

• Repeat Steps 1–6 to assemble the second fence panel with the remaining (20) Pickets (D).

• Drive (2) ¾" Self-Drilling Stainless Steel Screws (H) through the top rail of the second panel into each post to secure.

• Flip the assembled fence panel upright onto its feet as illustrated.

• Drive (4) ¾" Self-Drilling Stainless Steel Screws (H) through the bottom rail into each post on both panels to fully secure the bottom rail.

• Stand both completed fence panels upright and position them side by side for connection.

• Attach (2) Metal Feet (G) to the bottom of each end post as illustrated to stabilize the fence.

• Press (2) Post Caps (A) onto the tops of the two end posts to complete the assembly.

• Clip (2) Metal U-Joiners (F) onto the bottom rail at the connection point between the two panels to lock them together.

• Connect the two panels at either a 90° corner or a 45° angle as illustrated depending on your desired configuration.

Note: Remove feet when the product is not in use.

• Confirm all connections are secure and the fence is stable before use.

Note: This fence can easily be trimmed down horizontally to fit your custom space using a fine-toothed circular saw or hacksaw.

• Email: support@zippity-outdoor.com
• Phone: 704-892-5222 or 877-234-6196
• Text: 980-580-6508