Baskenridge Vinyl Fence Kit (2 Pack)

Baskenridge Vinyl Fence

Baskenridge Cover Image

ZP19037

Approximate assembly time 60 minutes

Click Here To Watch an Installation Video

Introduction

General Information

Important Safety Notes:

  • Check the inside of the larger pieces in your box for other materials packed inside.
  • When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching.
  • We recommend an area approximately 5’ x 8’ for unobstructed assembling.
  • You should not need to use excessive force when assembling components.

Returns:
If you wish to return your product, please contact us first — we can often help resolve the issue right away.
If a return is still necessary, it must be initiated with the retailer where the product was purchased.

Need Help or Replacement Parts?

Although great care has been taken to ensure proper packaging and handling of this product, occasional issues can occur.

If you need replacement parts, assembly assistance, or have questions about the product, our customer service team is happy to help.

Customer service agents are available 9am–5pm EST, Monday–Friday.

For Quick Assistance:

  • Have reference item number ZP19037
  • Provide the specific part name
  • Include the batch lot number found on the end of the box

Product Specifications

Detailed Dimensions & Specifications

Baskenridge Fence Dimensions & Line Drawings

Product Specifications:

  • Panel width: 42 in
  • Panel height: 36 in
  • Post spacing (center-to-center): 38 ¼ in
  • Approximate picket spacing: 2 in

Tools required for Best Experience

Drill

Drill

Mallet

Mallet

Wood Block

Wood block

Optional Tools

Tulip Bulb Auger

Tulip bulb auger

Level

Level

Smaller Pieces are Nested in Larger Pieces For Shipping Efficiency

Check larger pieces for smaller parts nestled in

Lay Out Materials

A. Post Cap (4)

Part A (4)

B. Rail (4)

Part B (4)

1½" x 1½" x 41⅞"

C. Post (4)

Part C (4)

⅞" x 1½" x 44"

D. Picket (20)

Part D (20)

¼" x 1¼" x 31¼"

E. Joiner Clip (4)

Part E (4)

F. ¾" Self-Drilling Stainless Steel Screw (16) (Bag A)

Part F (16)

G. 1" Self-Drilling Stainless Steel Screw (8) (Bag B)

Part G (8)

H. End Cap (8)

Part H (8)

(4 installed, 4 loose)

Step 1

Step1 Assemble on box or other smooth surface

Step 2

Step 2 put posts through rails

Step 3

Step 3 screw rails and posts together

Step 4

Step 4 Insert Pickets

  • Slide a second Rail (B) up the Posts (C) until the pickets lock into the routed holes in the rail.

Step 5

Step 5 Insert Bottom Rail

Step 7

Step 7 Insert end caps

Step 8

Step 8 Flip panel around

Step 9

Step 9 Attach 4 screws to rails and posts

Step 10

Step 10 Repeat steps 1-9 for second panel

Step 11

Step 11 Insert in ground leaving 2in clearance for aesthetic

Use scrap wood blcok for protection

If Ground is Too Hard

Loosen ground and soak with water

  • Loosen ground and soak with water

OR

Use 1.5" tulip auger drill attachment

  • Use 1.5" tulip auger drill attachment

Step 12

Joiner clips for 90 degree angle

OR

Joiner clips for 45 degree angle

Step 13

Attach all 4 caps to complete fence

Need Help?

We Are Part of
Site Logo
Visit Our Websites
Privacy Notice ©2024-Nych Brands Inc. or its affiliates