ZP19079 Zurich Poly-Steel Fence Kit

Important Safety Notes:

• Check the inside of the larger pieces in your box for other materials packed inside.
• Assemble on a soft, non-abrasive surface to avoid scratching.
• We recommend an area approximately 5' x 8' for unobstructed assembling.
• Do not overtighten screws; some force may be required to drive screws.

Returns:
If you wish to return your product, please contact us first — we can often help resolve the issue right away.
If a return is still necessary, it must be initiated with the retailer where the product was purchased.

If you need replacement parts, assembly assistance, or have questions about the product, our customer service team is happy to help.

• Parts Website: https://parts.nychbrands.com
• Email: support@zippity-outdoor.com
• Phone: 704-892-5222 or 877-234-6196

Customer service agents are available 9am–5pm EST, Monday–Friday.

For Quick Assistance:

• Have reference item number ZP19079
• Provide the specific part name or letter
• Include the batch lot number found on the end of the box

A. Rail (4)

B. Picket (20)

C. Stake (3)

D. ⅝" Black Self-Drilling Screw (8)

E. 1 ¼" Black Self-Drilling Screw (3)

F. Stake Ring Stop (3)

• Push the bottom rail (A) flush against a wall. Place pickets (B) into the bottom rail one by one.

• Align the top rail (A) just beneath the tops of the pickets (B) and press down to seat pickets into the rail.

• Secure pickets in place by driving ⅝" screws (D) into each rail end. Some force may be required — do not overtighten.

• Slide stakes (C) down through the stake channels between rail ends to connect panels together.

• Place a scrap wood block over the top of each stake (C) and tap down with a hammer. Check for level every few taps. Stop when 1.5" of stake remains exposed above the rail if raising panels (see Step 7).

• (Optional) Slide a stake ring stop (F) onto each stake (C) and secure with a 1¼" screw (E) to raise the panel off the ground. Do not overtighten.

• (Optional – For Sloped Ground) To step panels on a slope, install the lower panel beneath the stake ring stop (F) of the adjacent panel.

• Email: support@zippity-outdoor.com
• Phone: 704-892-5222 or 877-234-6196
• Text: 980-580-6508