25in H Black Metal Garden Fence (5 Pack)
WF29001
WF29001 25in Black Metal Garden Fence
25in H Black Metal Garden Fence (5 Pack)
25in H x 29.5in W
25" Black Metal Garden Fence (5-Pack with Stakes)

WF29001
Approximate assembly time for 30 minutes
Click here to watch an installation video
Introduction
General Information
Important Safety Notes:
- Check inside larger components for smaller parts that may be packed inside.
- Use a rubber mallet or a hammer with a wood block to protect the top of the metal stakes during installation.
- Install panels on level ground for best appearance and stability.
- Do not use excessive force when driving stakes into the ground.
Returns:
If you wish to return your product, please contact us first — we can often help resolve the issue right away.
If a return is still necessary, it must be initiated with the retailer where the product was purchased.
Need Help or Replacement Parts?
Although great care has been taken to ensure proper packaging and handling of this product, occasional issues can occur.
If you need replacement parts, assembly assistance, or have questions about the product, our customer service team is ready to help:
- Website: https://parts.nychbrands.com
- Email: support@zippity-outdoor.com
- Phone: 704-892-5222 or 877-234-6196
Customer service agents are available 9am–5pm EST, Monday–Friday.
For Quick Assistance:
- Have reference item number WF29001
- Provide the specific part name
- Include the batch lot number found on the end of the box
Product Specifications
Detailed Dimensions & Specifications

Product Specifications:
- Fence Panel Height: 25 in
- Fence Panel Width: 29½ in
- Metal Stake Diameter: ½ in
- Metal Stake Length: 38 in
- Recommended in-ground depth: 12⅜ in
Lay Out Materials
A — Fence Panel (4)

25" H × 29½" W
B — Metal Stake (6)

½" Diameter × 38" L
Recommended Tools (Not Included)
Rubber Mallet

Hammer & Wood Block

Step 1

- Insert Metal Stake (B) through the loops on Fence Panel (A).
- Drive the stake into the ground using a rubber mallet, or use a hammer with a wood block to protect the stake.
- Drive the stake until it reaches the top loop of the panel.
Step 2

- Align the next Fence Panel (A) with the installed panel.
- Insert a Metal Stake (B) through the loops of both panels to connect them.
- Drive the stake into the ground until secure.
- Repeat as needed to complete the fence layout.
Need Help?
- Email: support@zippity-outdoor.com
- Phone: 704-892-5222 or 877-234-6196
- Text: 980-580-6508